DataCard CP40 Specifications download pdf (Page 30)

Page 27

Site requirements

Operating environment

• Relative humidity: 20% to 80% non-condensing

• Temperature: 60° F to 95° F (15° C to 35° C)

Electrical requirements

• The external power supply is rated at 100-240 VAC, 50-60

Hz, 1.8 amp. (It adjusts to any power within this range.)

• Single phase, 3-wire, grounded receptacle only.

Physical requirements

• The printer weighs less than 9 pounds (4kg). The weight

depends on the supplies and options installed.

• Printer dimensions are 16.5 inches (419 mm) long, and 7.8

inches (198 mm) wide. The printer is 9 inches (229 mm) high.

• The clearances required are 1 inch (25mm) at the back, 2

inches (51 mm) on the left side, and 10.5 inches (267 mm)

above the printer latch to open the cover.

• Do not use the printer in a dirty environment. Do not use the

printer in a closed compartment. Do not block air flow around

the printer.

1 2 ... 25 26 27 28 29 30 31 32

No comments

DataCard CP40 Specifications Page 30