DataCard RL90 User's Guide download pdf (Page 57)

Laminator error recovery

RP90 and RL90 User Guide 51

6 Inspect the cartridge:

— If the material on the

cartridge is in one piece:

— Turn the cartridge take-

up knob clockwise until

all damaged material is

wound neatly on the

take-up spool.

— If the material is split

or broken:

— Trim the ends of the

broken portions evenly.

— Align the end of the

supply material with the

take-up spool and apply

tape to secure.

— Turn the material onto

the take-up spool until

the mended portion is

wound two or three

turns.

7 Replace the loaded laminator

cartridge in the printer until it

clicks into position.

8 Close the printer door.

9 Initialize the patch or topcoat

material by pressing the

laminator’s RESET/ and then

the ENTER key.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 74 75

Comments to this Manuals

No comments