DataCard RP90 Plus Installation Manual download pdf (Page 46)

RP90 Plus E Card Printer Installation Manual 43

Regulatory Compliance

Notice for USA (FCC Notice)

This equipment generates, uses, and can radiate radio frequency energy. If it is not installed

and used in accordance with this instruction manual, it may interfere with radio

communications. This equipment has been tested and found to be within the limits for Class A

computing devices, pursuant to Title 47 CFR Part 15 Subpart B of FCC rules, designed to

provide reasonable protection against radio interference in a commercial environment.

Operation of this equipment in a residential environment may possibly cause interference. In

the event of interference, the users, at their own expense, will be required to take whatever

measures are necessary to correct the problem.

Notice for Canada

This digital apparatus does not exceed the Class A limits for radio noise for digital apparatus

set out in the Radio Interference Regulations of the Canadian Department of

Communications.

Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites

applicables aux appareils numériques de la classe A prescrites dans le Règlement sur le

brouillage radioélectrique édicté par le ministère des Communications du Canada.

Safety

All Datacard products are built to strict safety and reliability specifications in accordance with

UL60950-1 and CUL requirements; therefore, safety issues pertaining to operation and repair

of Datacard equipment are primarily environmental and human interface.

The following basic safety tips are given to ensure safe installation, operation, and

maintenance of Datacard equipment and are not to be considered as comprehensive on

matters of safety.

Safe Environment

• Connect equipment to a grounded facility power source. Do not defeat or

bypass the ground lead.

• Place the equipment on a stable surface, and ensure that the floors in the

work area are dry and non-slip. Insulated rubber floor mats are preferred.

• Know the location of equipment branch circuit interrupters or circuit breakers

and how to turn them on and off in case of emergency.

• Know the location of fire extinguishers and how to use them. Use only ABC

type extinguishers on electrical fires.

• Know local procedures for first aid and emergency assistance at the customer

facility.

• Use adequate lighting at the equipment.

• Maintain the recommended range of temperature and humidity in equipment

area.

1 2 ... 41 42 43 44 45 46 47 48

No comments

DataCard RP90 Plus Installation Manual Page 46