DataCard ImageCard IV User's Guide download pdf (Page 48)

4-2 Loading supplies

User’s Guide for the ImageCard® IV Printer

Change the print ribbon

This section describes the three steps of changing the print ribbon:

• Remove the print ribbon cartridge

• Load the print ribbon in the cartridge

• Replace the print ribbon cartridge

Removing the print ribbon cartridge

Remove the print ribbon cartridge from the printer when the "print ribbon empty"

message appears, or when changing the type of ribbon you use.

If you change the type of print ribbon you use, see the

e-Guide for ImageCard IV

Printers

for the complete process to follow.

Remove the print ribbon cartridge

1 Push down on the corner of the printer's top cover to unlatch it. Lift the top cover

to the fully upright position.

Figure 4-1: Push and lift to open the top cover

When the top cover opens, the interlock switch removes power to all motors

and fans. If overlay or topcoat stations are installed, power is removed from

the heaters. Overlay or topcoat stations remain HOT.

2 Push on the printhead latch to release the printhead cage (step 1 in Figure 4-2).

ICIV031U

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 203 204

No comments

DataCard ImageCard IV User's Guide Page 48