DataCard SD Series Specifications download pdf (Page 79)

SD/CD Installation and Administrator’s Guide 71

Cards

Forbestresults,usehigh‐qualitycardsthatmeetthespecificationsand

recommendationsdescribedinthissection.

Card Size

UseISOID‐1cards(CR80cards).Thesecardshavethefollowingdimensions:

• 3.37incheslongby2.125incheswide(85.60mmlongx53.98mmwide).

• 0.010to0.030inchesthick(0.254to0.762mmthick).

Forencodingmagneticstripe,use cards:

• 3.37incheslongby2.125incheswide(85.60mmlongx53.98mmwide).

• 0.010to0.030inchesthick(0.508mmto0.762mmthick).

Actualcardthicknesscanvarybyuptotenpercentfromthesizeslisted.Typically,

cardbowmustbelessthanthethicknessofthecard.

Card Material

UsecardswithaglossyPVCsurface,either100%PVCcardsorcompositecards

withaPVCsurface.Cardscanhaveamagneticstripeononesideofthecard.

Pre-Punched Cards

Forbestresults,punchcardsafter

printingthem.Thecardscanhavea

punchedareawithin1inch(25mm)

oftheleftedge,asthecardsare

loadedintheprinter.Ifthecardhas

amagneticstripe,thecardcannot

bepunchedanywhereinthestripe.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 85 86

No comments

DataCard SD Series Specifications Page 79