DataCard SP75 Plus Installation Guide download pdf (Page 18)

Before You Install

Installation Guide 15

6 Write down the IP Address.

7 Press the Enter key to return to the Network

Status menu. "Subnet Mask" is displayed on Line

2. Press the Enter key to display the Subnet

Mask.

8 Press the Enter key to return to the Network

Status menu. "Gateway Addr" is displayed on

Line 2.

9 Press the Enter key to display the Gateway Address.

10 Press the Enter key to return to the Network Status menu. Press the Up or Down Arrow

key to display "Exit" on Line 2.

11 Press the Enter key repeatedly to return to the "Printer Ready" display.

Change the Address Mode to Static IP

Continue with the follow steps after determining the current Address Mode.

1 With “Main Menu” displayed on line 1, press the

Up or Down Arrow key to display "Configuration."

2 Press the Enter key to enter the Configuration

menu.

3 With "Configuration" displayed on Line 1, press

the Up or Down Arrow key to display "DHCP/

Static IP" on Line 2.

4 Press the Enter key. The current Address Mode

value is displayed on Line 2.

5 Press the Up or Down Arrow key to display Static

IP.

6 Press the Enter key. Continue with "Change Static IP Values".

Change Static IP Values

Continue with the follow steps after setting the Address Mode to Static IP or verifying that the

Address Mode is Static IP.

1 If needed, move to the Configuration

menu.

— With “Main Menu” displayed on

line 1, press the Up or Down

Arrow key to display

"Configuration."

— Press the Enter key to enter the

Configuration menu.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 83 84

No comments

DataCard SP75 Plus Installation Guide Page 18