DataCard SP75 Plus Installation Guide download pdf (Page 118)

Page 113

PR-01720 Ribbon Error

The print ribbon index mark was not found.

Possible Cause 1: The print ribbon is not installed correctly.

Solution 1: Remove and reinstall the print ribbon. Make sure the print ribbon

cartridge is fully seated.

Possible Cause 2: The print ribbon is folded on the take-up spool.

Solution 2: Remove and re-install the print ribbon on the cartridge; cut the

print ribbon, removed used ribbon from the take-up spool, and fasten the cut

end of the ribbon to the empty take-up spool.

Tips for success

• Make sure the printhead cartridge is seated correctly in the cover arm.

• Make sure the reflective label on the printhead is not dirty. Clean it with a

soft cloth if needed.

• You might have moved the print ribbon while the printer power was off.

The next card will print correctly. The printer is designed to allow you to

fix problems while the printer power is on.

If you cannot fix the problem, contact your service provider for assistance.

No comments

DataCard SP75 Plus Installation Guide Page 118