DataCard SP75 Plus Installation Guide download pdf (Page 56)

Page 51

Site requirements

Operating environment

• Relative humidity: 20% to 80% non-condensing

• Temperature: 60° F to 95° F (15° C to 35° C)

Electrical requirements

• The power supply is rated at 100-240 VAC, 50-60 Hz, 5.4

amp. (It adjusts to any power within this range.)

• Single phase, 3-wire, grounded receptacle only.

Physical requirements

• The printer weighs less than 30 pounds (13.6 kg). The

weight depends on the supplies and options installed.

• Printer dimensions are 23.1 inches (587 mm) long and 9.9

inches (251 mm) wide. With the 100-card input hopper, the

printer is 18.8 inches (478 mm) high and with the 200-card

hopper, it is 21.3 inches (541mm) high.

• The clearance required 9.5 inches (241 mm) at the back, 2

inches (51 mm) on the left side, and 10.5 inches (267 mm)

above the printer latch to open the cover.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 135 136

No comments

DataCard SP75 Plus Installation Guide Page 56