DataCard SP75 Plus Installation Guide download pdf (Page 26)

Page 21

Cleaning the printer

Run a cleaning card and change the cleaning sleeve when changing

the print ribbon. Make sure that all cards sent to the printer have

completed printing before cleaning.

1 Open the printer cover and remove the ribbon cartridge.

2 Remove the cleaning roller.

3 Open the input hopper cover.

4 Remove unprinted cards from the input hopper (1).

5 Open the Printer Toolbox (if needed, see "Open the Printer

Toolbox" on page 19).

6 Click the Clean Printer button. A prompt to insert the cleaning card

appears.

7 Open the cleaning card package and remove the cleaning card.

8 Insert the cleaning card into the input hopper (2), just past the roller.

9 Click OK on the message box. The printer moves the card through the

printer several times and ejects the card. Wait a few minutes to allow

the rollers to dry.

10 Slide the used cleaning sleeve off the spindle.

Clean

Printer

Button

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 135 136

No comments

DataCard SP75 Plus Installation Guide Page 26